“SPEED” window : Display the speed numerical value
“INCLINE “window: Display the
inclination numerical value
Metric-inch interconversion function
Pull out the safety key and press the “PROGRAM” key and “MODE” key at the same time,
“SPEED” window displays “M” means changing kilometers into miles. 3.2: Pull out the safety key
and press the “PROGRAM” key and “MODE” key at the same time, “SPEED” window displays
“KM “means changing miles into kilometers.
Touch button instruction
“PROG”: program select key : when the treadmill is stopped ,cycle select the program P0
-P36,U01-U03,HRC,Fat
you prefer.
“MODE”: mode select key; when you select the manual mode that is the normal mode. Press mode button you
can cycle select the Time countdown →distance countdown→calories countdown → Normal mode under
manual mode. The reposition of default of time countdown with 30 minutes when in P1-P36.
“START” key/”PAUSE”key: when the treadmill is stopped ,press the START key to turn on the treadmill. Press
“START” key when running, it will pause.
“STOP” key: Stop/Reposition/ Emergency Stop butt
on. When the treadmill is running, slowly stop the treadmill
by pressing once the STOP key. When the LCD window show the ERR massage, press the stop key to clear the
err massage. When the treadmill is running, press the “STOP” key twice, the treadmill will
stop immediately.
“+” KEY: Increase the speed when running. Increase the parameter under the body fat testing or stopping.
“–” KEY: Decrease the speed when running. Decrease the parameter under the body fat testing or stopping.
“QUICK SPEED” key: when th
e treadmill is running, you can set the speed directly by pressing the quick speed
key 3,6,9,12.
“
“ KEY : Decrease the incline by pressing this key .
“ KEY :Increase the incline by pressing this key .
“QUICK INCLINE KEY: Increase the incline directly
by pressing the quick incline key 3
，
6
，
9
Safety key functions
In any state, pull-out safety locks, window displays: E-07and sound buzzer BIBI-BI. Then put well the
safety lock, all show that the full light for 2 seconds, then go to manual start mode (the equivalent of
clearing reset).
MP3
Computer has built-in dual-channel stereo, switching mode power supply and no signal mute
function. Use the distributive audio adapter MP3 wire to connect the MP3 input and computer music
input, it will play.
Guidelines for safe use
Put the power cord into the electrical outlet with 10A. Flip this switch to the “ON”
position. The
screen shines with prompt sound.
