㧙㧙
INTRODUCTION
PRODUCT
USE
APPLICATION
PART No.
REMARKS
EVC-S
Boost Pressure Controller for Turbocharged Automobile Engines
DC12V Negative Ground Vehicles
45003-AK009
A fuel controller (e.g. F-CON V Pro, F-CON iS, etc) may be required when using this
product.
When installing this product on a twin turbocharged vehicle or a vehicle using a
4mm hose line, a separate Hose Set is required.
When the boost pressure is increased, the factory ECU may activate a fuel cut. To
deactivate the fuel cut function, a unit such as the HKS FCD is required. When using
an HKS FCD, a fuel controller must be used as additional fuel tuning.
˴
Read this instruction manual prior to installation to ensure safe and correct usage for optimal
product performance.
˴
The HKS EVC enables the adjustment of boost settings from inside the vehicles cabin area.
˴
This product was developed to improve engine output and was designed to be used for racing
on a closed circuit, where this unit is highly effective. When the engine output is improved,
water and/or oil temperature may rise, and insufficient oil pressure may occur. Always monitor these
vital readings to obtain optimal engine performance.
If using this product on a public road, follow all necessary laws, procedures and regulations for
a tuned/modified vehicle.
٨
Compact Size / 4 Separate Units
EVC-S includes 4 separate units: Display Unit, Control Unit, Boost Sensor, and Solenoid Valve.
Each unit is compact and easy to install in the engine bay and the interior. Since the Boost Sensor
is independent, hose routing does not need to run into the vehicles interior.
٨
Capable of Controlling High Boost
˴
EVC-S can control up to 250kPa (36PSI)
٨
Simple Boost Setting
Directly input the desired boost value to modes A and B, and let the HKS EVC control the boost.
٨
Return Function
The boost setting returns to the factory setting when the power is turned off. On some vehicles,
the boost value may be lower than the boost before installing the EVC-S.
٨
2 Mode Boost Setting Function
˴
A Mode and B Mode allow for 2 different boost settings.
˴
