㧙㧙
6-3. Data Lock
When setting the Data Lock, "LOCK" blinks on the lower right
corner of the monitor. When the Data Lock is on, "ON" appears,
and when the Data Lock is off, "OFF" appears.
˴
To turn on or off the Data Lock, press the center of the switch.
The set values can be locked by entering a lock number to prevent unintentional editing of data.
To edit data again after locking, enter the lock number to release.
To change the digit, press the left or right side of the switch. The
position of the blinking digit should be changed.
5'6
.1%-
5'6
.1%-
5'6
.1%-
.1%-
.1%-
.1%-
When setting the lock number, enter the digit of the lock number
that blinks on the monitor. When entering the number, refer to
the instructions in Section 5.
Press the center of the switch once the lock number is set.
5'6
.1%-
When the Data Lock is on, "ON" and "LOCK" appears on the
monitor. Data cannot be edited if a wrong lock number is entered.
