㧙㧙
˴˴˴̪
Remove any oil and/or lubricants on or in the
hose and vacuum filter.
˴˴
NOTE
˴˴̪
The position of the fitting
Ԙ
on the compressor
may vary depending on the vehicle.
Fitting
Ԙ
Fitting
Ԙ
Cut
5cm
Wastegate
6-8-6mm T-fitting
̪
Use hose clamps when connecting hoses to fittings.
˴˴̪
Use the 6-8-6mm T-fitting and 8mm Hose
Clamp included in the Poppet Valve Hose
Set.
6mm
Vacuum Filter
6mm Hose
Hose
Clamp
0%
6mm Hose
Hose Clamp
6mm Fitting
8mm Fitting
8mm Hose
(1) Cut the 8mm hose 5cm from the compressor’s
fitting
Ԙ
. Remove the remaining 8mm hose
and 8mm fitting from the wastegate.
(2) Install the 6-8-6mm T-fitting using the 8mm Hose
Clamp.
NOTE
(3) Connect the T-fitting with the 6mm vacuum filter
to the NC terminal fitting using the 6mm hose
from the Poppet Valve Hose Set.
ADVICE
(4) Remove the 8mm fitting from the wastegate, and
install the 6mm fitting (straight or L-shaped)
included in the Poppet Valve Hose Set.
(5) Connect the T-fitting to the wastegate using the
provided 6mm hose.
NOTE
Hose
Clamp
