4. Mounting Components
Display Unit (Back)
4-1. Mounting the Display Unit
4-2. Mounting the Solenoid Valve
(1) Install the Valve Bracket to the Solenoid Valve
using the M4 bolts from the Valve Bracket Set.
(2) Secure the Valve Bracket and the Solenoid Valve
to the vehicle using the Valve Installation Hardware.
˴˴
Double-sided Tape
Valve Bracket
Valve Bracket
Bolt (M4)
Solenoid Valve
Valve Installation
Hardware
4-3. Mounting the Boost Sensor
Boost Sensor
Installation Hardware
Fitting (face downward)
㧙㧙
CAUTION
(1) Remove any dirt, dust and/or oil from the mounting
surface for the Display Unit.
(2) Mount the Display Unit using the double-sided
tape.
Mount the Display Unit in a position lower than eye
level, or tilted downward for best visibility.
NOTE
Install the Solenoid Valve away from excessive heat
or water/moisture to avoid damage to the valve.
(1) Secure the Boost Sensor to the vehicle using the
Boost Sensor Installation Hardware.
(2) When securing the Boost Sensor, make sure the
fitting faces downward as shown in the diagram.
