㧙㧙
4. Control Off Mode
This mode deactivates the EVC-S boost control and reverts to the factory boost control.
In this mode, neither " " nor " " will appear on the monitor.
The boost pressure value can be displayed in this mode.
Press the center of the switch to go to the Boost Control mode.
M2C
˴
3-3. Warning
#
940
M2C
3-2. 3 After Image Display
The monitor will display a value when in the Control Off Mode.
After Image Display:
The value on the monitor blinks when in the After Image
Display.
˴
#
M2C
M2
#
#
2*
M2C
3-2. 2 Peak Hold Display
The Peak Hold Display shows the maximum boost pressure value from the recorded boost pressure
data.
While the Peak Hold Display is selected, " " appears on the monitor.
To reset the Peak Hold value, press the upper side of the switch longer than a second while the Peak
Hold Display is selected.
Press the lower side of the switch to return to the Monitor Display.
˴
2*
#
$
Peak Hold Display:
Press the lower side of the switch to return to the Monitor
Display.
The After Image Display blinks the maximum boost pressure value for 3 seconds when the boost
pressure changes from positive pressure to negative pressure. After 3 seconds, the display
returns to the Boost Dispay.
The Warning function activates when the actual boost pressure exceeds the set warning value.
The unit warns the user by a buzzer, and decreases the boost pressure to the set drop value.
While the Waning function is activated, "
" appears and the display blinks.
The monitor blinks when the Warning function is activating.
940
