Hiwin 25.12345, Руководство по сборке

Страница: 60 / 64

60
Appendix 2: Declaration of Incorporation
Assembly Instructions
Linear Tables HT-L
HTL-01-0-EN-1905-MA
12.
Appendix 2: Declaration of Incorporation
in the sense of the EU Machinery Directive 2006/42/EC, Annex II 1. B for partly completed machinery
The manufacturer: HIWIN GmbH, Brücklesbünd 1, D-77654 Offenburg
Documentation department: HIWIN GmbH, Brücklesbünd 1, D-77654 Offenburg
Description and identification of the partly completed machine:
Product: Linear tables HT-L
Type: HT150L, HT200L, HT250L
Year of manufacture: from 2017
It is hereby declared that the following essential requirements of the Machinery Directive 2006/42/EC have been
fulfilled.
1.1.3, 1.1.5, 1.2.1, 1.3.3, 1.3.4, 1.3.7, 1.3.9, 1.5.1, 1.5.8, 1.5.9, 1.6.2, 1.6.3, 1.5.5, 1.1.2, 1.3.2, 1.5.4
Moreover, it is declared that the relevant technical documentation specified under Annex VII Part B has been
compiled.
It is hereby explicitly declared that the partly completed machine complies with all of the pertinent conditions in
the following EC Directives.
2006/42/EG EC Machinery Directive
2014/30/EU Directive on electromagnetic compatibility (EMC)
2011/65/EU RoHS Directive on the restriction of hazardous substances
A reference to the harmonised standards used, as referred to in Article 7(2)
EN ISO 13732-1:2008 Ergonomics of the thermal environment – Methods for the assessment of human
responses to contact with surfaces – Part 1: Hot surfaces (ISO 13732-1:2008)
EN ISO 12100:2010-11 Safety of machinery – General principles for design – Risk assessment and risk reduc-
tion (ISO 12100:2010)
EN 60204-1:2006/AC:2010 Safety of machinery – Electrical equipment of machines – Part 1: General requirements
EN ISO 13849-1:2016-06 Safety of machinery – Safety-related parts of control systems – Part 1: General princi-
ples for design
EN ISO 13849-2:2012 Safety of machinery – Safety-related parts of control systems – Part 2: Validation
The manufacturer or the authorised person undertakes to transmit, in response to a reasoned request by the national authori-
ties, the relevant documentation on the partly completed machinery.
This is without prejudice to the intellectual property rights of the manufacturer!
Important note! The partly completed machinery may not be commissioned until it has been ascertained that the
machinery into which this partly completed machinery is to be incorporated is compliant with the provisions of
this Directive.
Offenburg, May 2019
Werner Mäurer,
Managing Director