Hitachi ZW 370-6 Скачать руководство пользователя страница 51

Страница: 51 / 450

S-39

SAFETY

Joystick Steering System ON/OFF (Option)

WARNING: Accidental movement of the stick while

getting on or off the machine may cause unexpected

movement of the machine resulting in an accident,

injury, or death.

Always stop, and properly park the machine and turn off the

joystick steering system while getting on or off the machine.

To turn OFF:

1. Push the lock button and lift armrest (1) to the fully

raised position before getting off the machine.

2. When armrest (1) is fully raised, the joystick steering

system is turned off automatically.

3. Then indicator lamp (2) on the monitor display goes out.

To turn ON:

1. Before operating the machine, lower armrest (1) back to

the operating position.

2. When armrest (1) is completely lowered the joystick

steering system is turned on automatically.

3. Then indicator lamp (2) on the monitor display turns on.

"Raised" position

PUSH

K-Lever5a

K-Lever5b

95Z7B-3-7-1

"Lowered" position

Содержание ZW 370-6



































































































































































































































































































































































































































































Результаты поиска

Содержание ZW 370-6

Отзывы:

Похожие инструкции для ZW 370-6

Бренды по названию

Популярные бренды

Hitachi ZW 370-6, Руководство оператора

Результаты поиска

Содержание ZW 370-6

Отзывы:

Похожие инструкции для ZW 370-6

Бренды по названию

Популярные бренды