Hitachi ZW 370-6 Скачать руководство пользователя страница 280

Страница: 280 / 450

OPERATING THE MACHINE

5-24

Dozing

IMPORTANT:



Dozing or pushing with dumped bucket or

attachment may cause severe damage to linkages.

It may also cause engine over-heating and torque

converter over-heating.



Never attempt to forcibly push piled material higher

than the bucket capacity. Premature wear of the

tires due to slipping and/or waste of fuel may result.



Never apply great force to the cutting edge with the

cutting edge tilted forward more than 10°. Failure to

obey so may result in damage such as cracks to the

working tools. Keep bucket or attachment bottom

parallel to ground.

Dozing with a wheel loader means a working method

performed by a wheel loader using the wheel loader bucket

in place of a bulldozer blade. This operation method is

employed when reclaiming land or dumping material into a

hopper, that is below ground level.

Set the bucket bottom parallel with the ground surface and

move the wheel loader forward.

Stock Piling

WARNING: Do not pile material on soft ground.

Steering on soft ground may easily cause the machine

to tip over.

Take care not to scrape the ground with the counterweight

while working.

The machine may become unstable, possibly causing the

machine to turnover.

M4GB-05-017KC

M4GB-05-018

Содержание ZW 370-6



































































































































































































































































































































































































































































Результаты поиска

Содержание ZW 370-6

Отзывы:

Похожие инструкции для ZW 370-6

Бренды по названию

Популярные бренды

Hitachi ZW 370-6, Руководство оператора

Результаты поиска

Содержание ZW 370-6

Отзывы:

Похожие инструкции для ZW 370-6

Бренды по названию

Популярные бренды