Hitachi ZW 370-6 Скачать руководство пользователя страница 300

Страница: 300 / 450

7-6

MAINTENANCE

95Z7-1-85-1

Preparations for Inspection and Maintenance

WARNING: If ride control switch (3) (option) is in the

AUTO position, the lift arm may unexpectedly rise.

To avoid an accident due to unexpected movement

of the lift arm and bucket, always turn ride control

switch (3) OFF before beginning the inspection and/or

maintenance of the machine.

CAUTION: If the machine is unexpectedly moved,

a serious accident may result. Be sure to apply the

parking brake when parking the machine.

Unless specified otherwise, park the machine by following the

procedures below before beginning the inspection and/or

maintenance work.

1. Park the machine on a solid level surface.

2. Lower the working tools such as the bucket level to the

ground.

3. Turn ride control switch (3) OFF.

NOTE: If your machine is equipped with the optional

joystick steering, set forward/reverse switch (a) on the

joystick steering to the neutral position.

Push the lock button and fully raise armrest (b) until it locks

in the raised position.

PUSH

"Raised" position

MNEC-07-001

Содержание ZW 370-6



































































































































































































































































































































































































































































Результаты поиска

Содержание ZW 370-6

Отзывы:

Похожие инструкции для ZW 370-6

Бренды по названию

Популярные бренды

Hitachi ZW 370-6, Руководство оператора

Результаты поиска

Содержание ZW 370-6

Отзывы:

Похожие инструкции для ZW 370-6

Бренды по названию

Популярные бренды