Hitachi ZW 370-6 Скачать руководство пользователя страница 27

Страница: 27 / 450

S-15

SAFETY

Travel on Public Roads Safely



This machine is not allowed to drive on public roads with

the bucket loaded.



Be sure to empty the bucket.



Hold the bucket at mark (A) 350 mm (14 in) above the

road surface as illustrated.

Avoid Injury from Rollaway Accidents



Death or serious injury may result if you attempt to mount

or stop a moving machine.

To avoid rollaways:



Select level ground when possible to park machine.



Do not park the machine on a grade.



Lower the bucket to the ground.



Put the forward / reverse lever (switch) in neutral.



Run the engine at low idle speed without load for 5

minutes to cool down the engine.



Turn the control lever lock switch to the lock ( ) position.



Turn the parking brake switch ON.



Stop the engine and remove the key from the key switch.



Block both tires and lower the bucket to the ground.



Position the machine to prevent rolling.



Park at a reasonable distance from other machines.

SA-457

SA-458

SA-453

Содержание ZW 370-6



































































































































































































































































































































































































































































Результаты поиска

Содержание ZW 370-6

Отзывы:

Похожие инструкции для ZW 370-6

Бренды по названию

Популярные бренды

Hitachi ZW 370-6, Руководство оператора

Результаты поиска

Содержание ZW 370-6

Отзывы:

Похожие инструкции для ZW 370-6

Бренды по названию

Популярные бренды