Hitachi ZW 370-6 Скачать руководство пользователя страница 17

Страница: 17 / 450

S-5

SAFETY

General Precautions for Cab



Before entering the cab, thoroughly remove all dirt and /

or oil from the soles of your work boots.

If any controls such as a pedal is operated while with dirt

and / or oil on the soles of the operator’s work boots the

operator’s foot may slip off the pedal, possibly resulting in

a personal accident.



Do not leave parts and / or tools lying around the

operator’s seat. Store them in their specified locations.



Avoid storing transparent bottles in the cab. Do not

attach any transparent type window decorations on

the windowpanes as they may focus sunlight, possibly

starting a fire.



Refrain from using music headphones or mobile

telephones in the cab while operating the machine.



Keep all flammable objects and / or explosives away from

the machine.



After using the ashtray, always cover it to extinguish the

match and / or tobacco.



Do not leave cigarette lighters in the cab. When the

temperature in the cab increases, the lighter may

explode.



Use proper floor mat dedicated to the machine.

If another floor mat is used, it may be displaced and

contact with the accelerator or brake pedals during

operation, resulting in serious injury or death.



Never weld, drill or in any way modify the ROPS without

approval from the manufacturer.

Содержание ZW 370-6



































































































































































































































































































































































































































































Результаты поиска

Содержание ZW 370-6

Отзывы:

Похожие инструкции для ZW 370-6

Бренды по названию

Популярные бренды

Hitachi ZW 370-6, Руководство оператора

Результаты поиска

Содержание ZW 370-6

Отзывы:

Похожие инструкции для ZW 370-6

Бренды по названию

Популярные бренды