Hitachi RCI-3.0UFE1NH, Руководство по обслуживанию

Страница: 8 / 52

1
1
.
.
O
O
P
P
T
T
I
I
O
O
N
N
L
L
I
I
S
S
T
T
3
.
Temperature setting
Press the " " or " " button to enter the temperature setting state.
Each time “ ” button is pressed , temperature setting increases by 1
℃
；
Each time “ ” button is pressed , temperature setting decreases by 1 ℃
.
Temperature setting range
COOLING, HEATING, DRY, AUTO
16 ℃~ 30 ℃
FAN ONLY Unavailable for setting
1. Heating mode is invalid for cooling-only air conditioners.
2. The default setting range depends on the indoor unit
.
3. Setting range can be changed by professional staff, and for detailed operations, please contact the
installation service/after-sales service center.
4. When the set temperature reaches the upper or lower limits, setting temperature will not increase or
decrease.
” buttons for 5s simultaneously to adjust the airflow direction.
5 . Airflow swing setting
Press and hold “ ” and “
The airflow direction setting will change in the following sequence by default:
:
This function is only applicable to the air conditioning units with the swing function.
Function set
AUTO fan speed is invalid for “FAN” mode.
AUTO fan speed is the default setting under the DRY mode, unabling adjusting.
4.. Fan speed setti
ng
When the appliance is in working mode, press the " " button to adjust the fan speed.
The fan speed will change in the following sequence:
None
No display
UP-DOWN AND LEFT-RIGHT
Airflow Swing
MEDIUM HIGH
AUTO
Up
/
Down Airflow Swing Left
/
Right Airflow Swing
(blinking)
LOW
:
:
The maximum cooling/heating capacity can be activated at
the super mode.
How to activate:
Press and hold" " and " " buttons for 5s simultaneously with the working unit to activate the
super mode, and the indoor unit will run at the ultrahigh fan speed, and displays icon.
If you operate the Super mode under COOLING, DRY and FAN ONLY modes, the unit will
automatically go into forced cooling mode with lowest setting temperature, or go into forced
heating mode with highest setting temperature under the heating mode.
How to cancel:
Press " "/" "/" " button to exit immediately.
:
For the indoor units without ultrahigh fan speed function, it will be adjusted to run at high fan speed under
the super mode, with high fan speed mode icon displayed.
The silent mode reduces the noise by changing the fan speed of
indoor unit so as to keep quiet during operation at night.
How to activate:
In the COOLING/HEATING mode during appliance operation, press and hold " "and “ ”
buttons for 5s simultaneously to activate silent mode, the indoor unit will run at the ultralow fan
speed, and displays icon.
How to cancel:
Press " "/" "/" " button to exit.
:
For the indoor units without ultralow fan speed function, it will be adjusted to run at low fan speed
under the
silent
mode, with low fan speed mode icon displayed.
Super mode
Silent mode
6