APPENDIX 2 - 4
3. Individual Contacts of Each Unit
(1) Contact Signal Input Terminals
These are contact signal input terminals for control using
contact signals from an external switch, relay etc. Any of
the signals is activated by shorting the terminal for 0.1
second or longer. The input circuit is shown in Fig. 3.
(2) Contact signal Output Terminals
These are contact signal input terminals for control using
contact signals of an external unit. The output circuit is
shown in Fig. 4. The rating of contacts used is 12 V,
0.1 A. Make sure the load connected does not exceed this
rating.
Fig. 1
e-Line Cable Connection
Fig. 2 e-Line Contact Circuit Configuration
+5 V
320
IN
Max. 10 mA/unit
Max. 0.1 A
OUT 4.7 k
ON : 5 V
OFF : 0 V
Max. 12 V
(reverse polarity
not allowed)
(H)
(L)
(G)
e-Line cable
Other unit
Primaide1000 series
unit A
Primaide1000 series
unit B
Содержание PRIMAIDE 1440
Страница 1: ...PRIMAIDE 1440 荧光检出器 ...