Hitachi NV 50AG2, Технические данные и руководство по обслуживанию

Страница: 7 / 39

--- 5 ---
Min.
Max.
Fig. 1 Dimensions of nails
5-2. Nail Selection
Choose a suitable nail from Fig. 1 "Dimensions of nails". Nails which are not shown in Fig. 1 "Dimensions of
nails" cannot be driven with this tool.
Nails are collated and coiled as shown in Fig. 2.
NOTE: There are nails very similar to those illustrated below in local markets. However, since dimensions
other than those shown will cause jamming, faulty nail feeding, and/or damage to the tool
mechanism, it is important that the customer be cautioned to ensure that only Hitachi approved
nails are utilized.
7.0 mm
(.273")
7.0 mm
(.273")
2.5 mm
(.098")
2.3 mm
(.091")
32 mm (1-1/4")
45 mm (1-3/4")
7.0 mm
(.273")
2.3 mm
(.091")
50 mm (2")