manualshive.com logo in svg

Hitachi NV 50AG2, Технические данные и руководство по обслуживанию

Поделиться
Скачать
Hitachi NV 50AG2 Скачать руководство пользователя страница 19

--- 17 ---

Fault

Cause

(The mark * refers to main causes.)

Inspection method

Remedy

(4)

Nail
jamming

< Nail >

* Nails not approved by
  Hitachi are used.
* Abnormal nails are mixed.
* The collation sheet is

abnormal (deformed or
broken).

  Nails fall off.
  Nails are missing from the

sheet.  (Sheet collation
nails)

Check whether or not nails
approved by Hitachi are used.
Check nails referring to the
following figures.

Use the nails approved by
Hitachi.
Remove abnormal nalis and
refill the nailer with normal
nails.

(Sheet collation nails)

5.7 mm

(0.224")

22 mm

(0.866")

7.5 mm

(0.295")

Check whether or not when
injecting air or actually
injecting nails, the driver blade
is completely returned.

Open the nail guide to check
the position of the feeder
claw.
Check whether or not the
chuck of the feeder holds a
nail, and the first nail is
positioned in the injection
port.
(Check that the second claw
chucks the nail shaft and
feeds it.)

Replace the abnormal parts.
Nose…Remove the foreign
matter in the feed piston
chamber.

< Body: Nail feeding is

incomplete. >

The feeder is worn, and the
sliding section is abnormal.
The nail guide face of the
nose and the sliding
section of the feeder are
abnormal (deformed,
warped and/or damaged).
The nail guide face of the
nail guide is worn.
The driver blade head is
worn.
The feed spring and the
feeder spring are abnormal
(damaged, fatigued and/or
damaged).

* The feed piston chamber
  contains foreign matter
  such as piston bumper

pieces.

Adjust the air pressure in a
range of 4.9 --- 8.3 bar (5 --- 8.5
kgf/cm

2

, 70 --- 120 psi).

< The driver blade is not

completely returned. >

Refer to Item 1.

< Output section: Piston,

driver blade, etc.>

< Output section: Piston,

driver blade, etc. >

Air pressure is too high.

When nails are driven at a
high pressure and speed,
nails can cause jamming.
Check pressure and driving
speed.

< Body: Abnormality in nail guide section >

 Refer to Item 1 

< Nail guide section >

Содержание NV 50AG2








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды