Hitachi G1000 Скачать руководство пользователя

Страница: 2 / 246

No part of this publication may be reproduced or transmitted in any form or by any means,

electronic or mechanical, including photocopying and recording, or stored in a database or retrieval

system for any purpose without the express written permission of Hitachi, Ltd.

Hitachi, Ltd., reserves the right to make changes to this document at any time without notice and

assumes no responsibility for its use. This document contains the most current information available

at the time of publication. When new or revised information becomes available, this entire

document will be updated and distributed to all registered users.

Some of the features described in this document might not be currently available. Refer to the most

recent product announcement for information about feature and product availability, or contact

Hitachi Data Systems Corporation at

https://portal.hds.com

Notice:

Hitachi, Ltd., products and services can be ordered only under the terms and conditions of

the applicable Hitachi Data Systems Corporation agreements. The use of Hitachi, Ltd., products is

governed by the terms of your agreements with Hitachi Data Systems Corporation.

Notice on Export Controls:

The technical data and technology inherent in this Document may be

subject to U.S. export control laws, including the U.S. Export Administration Act and its associated

regulations, and may be subject to export or import regulations in other countries. Reader agrees to

comply strictly with all such regulations and acknowledges that Reader has the responsibility to

obtain licenses to export, re-export, or import the Document and any Compliant Products.

Hitachi is a registered trademark of Hitachi, Ltd., in the United States and other countries. Hitachi

Data Systems is a registered trademark and service mark of Hitachi, Ltd., in the United States and

other countries.

Archivas, Essential NAS Platform, Hi-Track, ShadowImage, Tagmaserve, Tagmasoft, Tagmasolve,

Tagmastore, TrueCopy, Universal Star Network, and Universal Storage Platform are registered

trademarks of Hitachi Data Systems Corporation.

AIX, AS/400, DB2, Domino, DS6000, DS8000, Enterprise Storage Server,ESCON, FICON,

FlashCopy, IBM, Lotus, MVS, RS/6000, S/390,System z9, System z10, Tivoli, VM/ESA, z/OS, z9,

z10, zSeries, z/VM, and z/VSE are registered trademarks or trademarks of International Business

Machines Corporation.>

All other trademarks, service marks, and company names in this document or website are

properties of their respective owners.

Microsoft product screen shots are reprinted with permission from Microsoft Corporation.

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Содержание G1000























































































































































































































































Результаты поиска

Содержание G1000

Отзывы:

Похожие инструкции для G1000

Бренды по названию

Популярные бренды

Hitachi G1000, Руководство пользователя

Результаты поиска

Содержание G1000

Отзывы:

Похожие инструкции для G1000

Бренды по названию

Популярные бренды