Hitachi G1000 Скачать руководство пользователя

Страница: 235 / 246

Error code

(SSB2)

Details

FC31

The pair resynchronization or swap resync was rejected for one of the

following reasons:
•

The pair status of the volume specified for the swap resync is not

SSWS.

•

The volume specified for the swap resync is not the secondary volume

of the GAD pair.

•

The I/O mode of the volume specified for the swap resync is Block.

•

The pair status of the volume paired with the volume specified for the

pair resynchronization is not SSUS or PSUE.

•

The I/O mode of the volume paired with the volume specified for the

pair resynchronization is not Block.

FC38

A request to suspend a pair was received, but the pair cannot be

suspended because the specified volume meets one of the following

conditions:
•

An instruction specifying that the primary volume be suspended is

directed at the secondary volume.

•

An instruction specifying that the secondary volume be suspended is

directed at the primary volume.

•

The pair status is not PAIR or COPY.

FC39

A request to suspend a pair was received, but the pair cannot be

suspended because the volume paired with the specified volume meets one

of the following conditions:
•

The paired volume is the primary volume, but an instruction specifies

that the primary volume be suspended.

•

The paired volume is the secondary volume, but an instruction

specifies that the secondary volume be suspended.

•

The pair status is not PAIR or COPY.

FC40

A request to delete a pair was received, but the pair cannot be deleted

because the specified volume meets one of the following conditions:
•

An instruction specifying that the primary volume be deleted is

directed at the secondary volume.

•

An instruction specifying that the secondary volume be deleted is

directed at the primary volume.

•

The pair status is not PSUS, SSUS, SSWS, or PSUE.

•

The I/O mode is not Local.

FC41

A request to delete a pair was received, but the pair cannot be deleted

because the volume paired with the specified volume meets one of the

following conditions:
•

The paired volume is the primary volume, but an instruction specifies

that the primary volume be deleted.

•

The paired volume is the secondary volume, but an instruction

specifies that the secondary volume be deleted.

•

The pair status is not PSUS, SSUS, SSWS, or PSUE.

•

The I/O mode is not Block.

Troubleshooting

9-15

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Содержание G1000























































































































































































































































Результаты поиска

Содержание G1000

Отзывы:

Похожие инструкции для G1000

Бренды по названию

Популярные бренды

Hitachi G1000, Руководство пользователя

Результаты поиска

Содержание G1000

Отзывы:

Похожие инструкции для G1000

Бренды по названию

Популярные бренды