Hitachi FL.NET, Руководство пользователя

Страница: 305 / 307

8 APPENDIXES
8-81
8.9.5 System parameter examples (CNC examples)
Table 8-21 shows CNC system parameter examples.
Table 8-21 System Parameter Tabular Document Notation (CNC Examples)
Parameter name
Name character string
[PrintableString type]
(Length), (String)
Data type
[type]
Contents of
parameter
(Length), (Contents)
SysPara
Device profile common
specification version
6, “COMVER” INTEGER 1,1
System parameter
identification string 2, “ID” PrintableString 7, “SYSPARA”
System parameter
revision number 3, “REV” INTEGER 1, 0
System parameter
revision date 7, “REVDATE” [INTEGER], 2, (0001-9999),
[INTEGER], 1, (01-12),
[INTEGER], 1, (01-31) 2, 1998
1, 9
1, 30
Device category 10, “DVCATEGORY” PrintableString 3, “CNC”
Vendor name 6, “VENDOR” PrintableString 9, “MSTCJ LTD”
Product model 7, “DVMODEL” PrintableString 16, “MSTCJ Series
16a”
Parameter name Name character string Data type
Contents of
parameter
CncPara
Device-specific
parameter identification
string
2, “ID” PrintableString 7, “DEVPARA”
Model name 5, “MODEL” PrintableString 8, “MS16a-MA”
Series 6, “SERIES” PrintableString 4, “MSF1”
Revision 3, “REV” INTEGER 1, 0
System 7, “System” SEQUENCE *
System information 7, “SysInfo” SEQUENCE *
*: This parameter is a Constructed type and has the data listed below.
System
Option configuration flag
5, “SFLAG” BIT STRING 8, “00100101”
Control axis count 4, “AXES” INTEGER 2, 4
SysInfo
Input virtual address
2, “IN” OCTET STRING 6, “000000”
Output virtual address 3, “OUT” OCTET STRING 6, “040000”