11
Installation of the bottom plate
底板的安裝
How to Install the Water Supply Hose
供水管的安裝
The bottom plate is placed on the packaging foam
on the top of the washer.
出廠時,底板安放在洗衣機頂部的包裝發泡上
Firmly tighten the union nut when
connecting the water supply
hose to the main unit.
沿箭咀方向旋轉連接螺母,使其與
供水口緊緊相連。
•
Loosely tightened union nut will cause water leakage.
請務必擰緊供水管與機體的連接螺母。否則,將會漏
水。
•
When removing the hose, unscrew the union nut first.
拆卸供水管時,先鬆開連接螺母,再進行拆卸。
Please use optional extension tube for
lengthening the water supply hose.
請使用另行銷售的延長供水管。
•
Three standard of extension hoses (1m,2m,3m)
are available. Please inquire distributors for
extending the water supply hose.
備有
1m
、
2m
和
3m
三种規格供購買。
如欲駁長供水管,請向銷售商查詢。
Union nut
連接螺母
Connecting the water supply hose to the main unit
供水管與機體的連接
Extended the water supply hose
供水管的延長
1
Please place the washer transversely in a
slight way.
請將機體輕輕地放倒。
•
Before placing the washer transversely, lay some soft
paper pad on the ground to avoid damage to the
body.
放倒機體時,請在地面上放置一些瓦楞紙類的襯墊,
以免損傷機身。
2
Align the hook on the bottom plate with
the square hole on the chassis and insert
it, then tighten the screw.
將底板上的倒鉤對准底盤上的方孔插入,然後
擰緊螺釘。
硬紙板等
Corrugate paper etc.