manualshive.com logo in svg

Hitachi Aloka Medical UST-9113P-3.5, Инструкция по эксплуатации, Страница: 27 / 56

Поделиться
Скачать
Hitachi Aloka Medical UST-9113P-3.5 Скачать руководство пользователя страница 27

-21-

MN1-1014 Rev. 14

3-3. Checking the needle echo

3-3-1. Check preparation

(1) Required items

Tub   

 

 

(Depth of 20 cm or more)

Warm water   

 

40°C (104°F) 

Thermometer  

Probe 

   

Puncture adapter 

 

MP-2480-G18 (standard configuration) 

 

 

 

 

or others (user's selection of the options)

Puncture needle 

 

Size : 18G (standard configuration) 

 

 

 

 

          or others (depend on user's selection)

 

 

 

 

Length : 150 mm to 200 mm

(2) Setup procedure

1. Put warm water at 40°C (104°F) into the tub.

  

  

Use a thermometer to check the water temperature.

2. Refer to section 4-1 "Operation" and attach the puncture adapter to the probe, and insert the puncture 

    needle into the puncture adapter.

    Check that the puncture needle has no bending or other defects.

3. Connect the probe to the ultrasound diagnostic instrument.

 

   Turn on the ultrasound diagnostic instrument to display the puncture guide line on the monitor screen.

Remarks:

For details of the puncture guide line, refer to the instruction manual of the ultrasound diagnostic instrument.

 Caution

Use warm water at 40°C (104°F) in the check of the needle echo.

In the actual puncture operation, the needle echo and guide line may not match and this could result 

in puncturing of an unintended body part. It is well-known that the acoustic characteristics of water 

at 40°C (104°F) are the most similar to those of the human body.

Have to selected the guide line of the correct angle.

The ultrasound diagnostic instrument have four different angled guide lines that is depend on the 

angle of the puncture adapter.

Содержание UST-9113P-3.5

























































Отзывы:

Нет отзывов