Hisun HS700UTV-4, Руководство по обслуживанию

Страница: 127 / 388

MAINTENANCE AND ADJUSTMENT OF THE UTV
- 114-
ADJUSTING THE TOE-IN
1. Place the vehicle on a level surface.
2. Measure:
• toe-in
Out of specification Adjust.
Toe-in
0 ~ 10 mm (0.00 ~ 0.39 in)
(with tires touching the ground)
NOTE
:
Before measuring the toe-in, make sure that
the tire pressure is correct.
a. Mark both front tire tread centers.
b. Face the steering wheel straight ahead.
c. Measure distance
□
A
between the marks.
d. Rotate the front tires 180° until the marks are
exactly opposite one another.
e. Measure distance
□
B
between the marks.
f. Calculate the toe-in using the formula given
below.
Toe-in=
□
B
-
□
A
g. If the toe-in is incorrect, adjust it.
。
3. Adjust:
• toe-in
WARNING :
• Be sure that both tie-rods are turned the
same amount. If not, the vehicle will drif
t
right or left even though the steering whee l
is positioned straight. This may lead t o
mishandling and an accident.
• After setting the toe-in to specification, run
the vehicle slowly for some distance with
both hands lightly holding the steering whee
l
and check that the steering wheel responds
correctly. If not, turn either the right or lef
t
tie-rod within the toe-in specification.
a. Mark both tie-rods ends. This reference point
will be needed during adjustment.
b. Loosen the locknut (tie-rod end) on each ①
tie-rod.