Hisun HS700UTV-4, Руководство по обслуживанию

Страница: 24 / 388

GENERAL INFORMATION
- 11 -
BASIC TOOLS
Most of the procedures in this manual can be carried out with basic hand tools and test equipment
familiar to the home mechanic. Always use the correct tools for the job. Keep tools organized and
clean. Store them in a tool chest with related tools organized together.
Quality tools are essential. The best are constructed of high-strength alloy steel. These tools are
light, easy to use and resistant to wear. Their working surface is devoid of sharp edges and carefully
polished. They have an easy-to-clean finish and are comfortable to use. Quality tools are a good
investment.
Some of the procedures in this manual specify special tools. In many cases the tools is illustrated
in use. Those with a large tool kit may be able to replacement. However, in some cases, the
specialized equipment or expertise may make it impractical for the home mechanic to attempt the
procedure. When necessary, such operations are recommended to have a dealership or specialist
perform the task. It may be less expensive to have a professional perform these jobs, especially when
considering the cost of equipment.
When purchasing tools to perform the procedures covered in this manual, consider the tool’s
potential frequency of use. If a tool kit is just now being started. Consider purchasing a basic tool set
from a quality tool combinations and offer substantial savings when complicated, specialized tools can
be added.
Screwdrivers
Screwdrivers of various lengths and types are
mandatory for the simplest tool kit. The two basic
types are the slotted tip (flat blade) and the Phillips
tip. These are available in sets that often include an
assortment of tip size and shaft lengths.
As with all tools, use a screwdriver designed for
the job. Make sure the size of the fastener. Use
them only for driving screws. Never use a
screwdriver for prying or chiseling metal. Repair or replace worn or damaged screwdrivers. A worn tip
may damage the fastener, making it difficult to remove.
Phillips-head screws are often damaged by incorrectly fitting screwdrivers. Quality Phillips
screwdrivers are manufactured with their crosshead tip machined to Phillips Screw Company
specifications. Poor quality or damaged Phillips screwdrivers can back out (cam out) and round over
the screw head. In addition. Weak or soft screw materials can make removal difficult.
The best type of screwdriver to use on Phillips screw is the ACR Phillips II screwdriver, patented
by the horizontal anti-cam out ribs found on the driving faces or flutes of the screwdriver’s tip ( figure 4 ).
ACR Phillips II screwdrivers were designed as part of a manufacturing drive system to be used with
ACR Phillips II screws, but they work of tool companies offer ACR Phillips II screwdrivers in different
Tip size and interchangeable bits to fit screwdriver bit holders.