HISEER AS10/LF, Руководство по эксплуатации, установке и обслуживанию

Страница: 44 / 61

42
Commissioning Form
Client / Installation address: Telephone Number
Installer: Commissioned by
Heat pump Model: Heat pump serial number:
Commissioning date:
The heating system has been filled and pressure tested YES ( )
Expansion vessel for heating is sized, fitted & charged in accordance with manufacturer’s
instructions
YES ( )
The heat pump is fitted on a solid/stable surface capable of taking its weight YES ( )
The system has been flushed and cleaned in accordance with heat pump manufacturer’s
instructions
YES ( )
What system cleaner was used?
What inhibitor was used? Qty:( ) litres
Are all exposed external pipeworks insulated? YES ( )
Central heating mode ( 10 minutes after compressor start to run)
Is buffer tank installed Capacity:( ) litres
Inlet
( )℃
discharge
( )℃
outlet
( )℃
suction
( )℃
ambient
( )℃
HPS
( )℃
Hot water ( )
℃
LPS ( )
℃
Power voltage ( )V
Current ( )A
Domestic hot water mode ( 10 minutes after compressor start to run)
Is a hot water cylinder installed Capacity:( ) litres Heating coil diameter ( )mm, length ( )m
Inlet
( )℃
discharge
( )℃
outlet
( )℃
suction
( )℃
ambient
( )℃
HPS
( )℃
hot water
( )℃
LPS ( )
℃
Power voltage ( )V Current ( )A
Additional heat sources connected: Gas Boiler ( ) Oil Boiler ( ) Electric Heater ( )
Solar Thermal ( )
YES ( )
The heating, hot water and ventilation systems complies with the appropriate Building Regulations YES ( )
All electrical work complies with the appropriate Regulations YES ( )
The heat pump and associated products have been installed and commissioned as the manufacturer’s
instructions
YES ( )
The operation of the heat pump and system controls have been demonstrated to the customer YES ( )
The operation, installation and maintenance manual has been explained and left with the customer YES ( )
Commissioning Engineer’s Signature
Customer’s Signature
(To confirm demonstration of equipment and receipt of appliance instructions)