HISEER AS10/LF, Руководство по эксплуатации, установке и обслуживанию

Страница: 28 / 61

26
User Guide
Changing Set points (for user)
Display Procedures
press <Prg> to main menu, press Down button to User, Press Enter button,
Press Down button to the desired parameter.
Press Enter button, when 7.0 is flashing, press Up or Down button to
change the value.
Press Enter to confirm.
Cursor will move to next parameter data 40,
40 will flash and could be changed via up or down button.
Press Enter to confirm,
Cursor will move to setpoint,
When setpoint is flashing, press Down button to next parameters.
Or, continuously press <Esc> to exit out of the current level and back to the desired menu level.
User
S02 Setpoint
ST01: Cooling
ST02: Heating
7.0
℃
40.0
℃
User Parameters
User parameters could be adjusted when the unit is ON or OFF.
Para-
meter
Descriptions
De-
fault
Min. Max. Unit Res
System mode Cooling or heating
ST01 Setting temperature at cooling mode 7 ST11 ST12 ºC 0.1
ST02 Setting temperature at heating mode 40 ST13 ST14 ºC 0.1
ST03 Setting temperature difference at cooling mode 2 0 10 ºC 0.1
ST04 Setting temperature difference at Heating mode 2 0 10 ºC 0.1
ST05 Setting temperature at heating compensation 25 0 30 ºC 0.1
ST06 Compensation factor for heating compensation 0.6 0 30 - 0.1
ST07 Outdoor temp. to start the boiler or electric heater 0 -20 20 ºC 0.1
ST09 Hot water temperature 50 ST15 ST16 ºC 0.1
ST10 Hot water temperature difference 3 1 10 ºC 0.1
ST26 Disinfect time 0 0 1000 h 1
ST27 Disinfect temperature 65 50 99.9 ºC 0.1
TR09 AC timezone On/Off NO YES or NO
TR10 HW timezone On/Off NO YES or NO
SF04 Enable weather compensation NO YES or NO