HISEER AS10/LF, Руководство по эксплуатации, установке и обслуживанию

Страница: 32 / 61

30
User Guide
Timezone on/off
Timezone on/off
TR09: AC timezone No
TR10: HW timezone No
Timezone activates the pre-set timer programs.
Timezone function is only valid when unit ON/OFF
method is “by keyboard”.
TR09:AC timerzone is for space heating
When TR09 is set YES, two different time periods is
available to set in every day from Sunday to Saturday.
Timezone on/off
Monday:
AC-1:
AC-2:
ON OFF
00:00 00:00
00:00 00:00
After finishing timer setting for Monday , then scroll
to “Monday” and press up or down button to change
to Tuesday to set its timer , then Wednesday and so on.
If ON and OFF data is same, the timer function is not
activated.
TR10:HW timezone is for domestic hot water.
When TR10 is set YES, two different time periods is
available to set in every day from Sunday to Saturday
Timezone on/off
Monday:
HW-1:
HW-2:
ON OFF
00:00 00:00
00:00 00:00
If the unit is manually turned on by keyboard before
the automatic turning on by the timer, this timer ON
program is implemented and unit will be turned off
automatically when the time of timer OFF has come.
If the unit is manually turned off by keyboard before
the automatic turning off by the timer, this timer OFF
program is implemented .
If everyday timezone setting is same, do not need to set
day by day, just go to
Timezone on/off
Monday:
Copy from Monday
Confirm: NO
Change Monday to Tuesday, and change “No” to
“Yes” ,then Tuesday’s timezone setting will be same as
Monday.
With the same method to change Wednesday….etc.
Compressor Operating hours
Display compressor operating hours.
Compressor
Operating hours
000000hour
Night mode
Outdoor fan could be set to run in lower speed at night
to reduce noise level.
Outdoor fan
Night mode:
On:
Off:
Enable
22:00
06:00
Default setting of night mode is activated from 22:00 to
6:00.
The night mode time could be adjusted by the user.
This function is to store user setting to factory default
setting . Change “NO” to “YES”, press <Enter> , it will
display “Operation succeed” .
Insert User default