HISEER AS10/LF, Руководство по эксплуатации, установке и обслуживанию

Страница: 41 / 61

39
Manufacturer parameters
Display Procedures
press <Prg> to main menu, press Down button to Parameter, Press Enter
button,
Press Enter and 0 will flash, press Down button to the correct figure, press
Enter to confirm.
Likewise, change the other 3 figure .After 4 correct figure are inputted,
It will enter Service level parameter.
If the inputted password is service, it will just enter Service level
parameters.
If the inputted password is manufacturer, it will access both service and
manufacturer level parameter.
press Down button to Manufacturer Parameter
Press Down button, it display parameter and data.
Press Enter to confirm,
when data is flashing, press Up or Down button to change the value.
Press Enter to confirm.
Cursor will move to P02
When P02 is flashing, press Down button to next parameters.
Or, continuously press <Esc> to exit out of the current level and back to the desired menu level.
Warning : Manufacturer parameter is related to the unit safe running and reliability. It is not supposed to be changed
without manufacturer’s permission. Any wrong change could possibly cause the unit broken.
Access Manufacturer Level Parameter data
Enter password
0000
Service
Manyfacture
Comp. management
CM01:Min on
CM02:Min off
180s
300s
P02