Hioki PW3335, Инструкция по эксплуатации

Страница: 16 / 123

14
PW3335A985-01
2 Message List
The information in angled brackets < > represents the data format.
When the GP-IB interface is used, you can send an SRQ interrupt to the controller by setting the Event Status Register
and *SRE.
Standard Commands
Message
Data Formats
(Response data for queries) Description
Reference
Page
*CLS
Clears the event registers and the Status Byte
Register.
35
*ESE
0 to 255
Sets/Queries the Standard Event
Status Enable Register.
35
*ESE?
*ESR?
0 to 255 Queries the Standard Event Status Register.
35
*IDN?
<Manufacturer name>,
<Model name>,
<Model type>,
<Software version>
<Serial number>
Queries the Device ID.
33
*OPC
Sets bit 0 of the Standard Event Status Register
to 1 after an operation completes.
34
*OPC?
1 Queries execution completion.
34
*OPT?
Queries the device options.
33
*RST
Initializes the device.
33
*SRE
0 to 127
Sets/Queries the Service Request Enable
Register.
36
*SRE?
*STB?
0 to 127 Queries the Status Byte Register.
36
*TRG
Updates the display once.
36
*TST?
0 to 4 Initiates a self-test and queries the result.
34
*WAI
Waits until the next display update completes.
34
Device-specific Commands (Event Registers)
Message
Data Formats
(Response data for queries)
Description
Reference
Page
:ESE0
0 to 255 Sets/Queries Event Status Enable Register 0.
37
:ESE0?
:ESR0? (0 to 255) Queries Event Status Register 0.
37
:ESE1
0 to 255 Sets/Queries Event Status Enable Register 1.
37
:ESE1?
:ESR1? (0 to 255) Queries Event Status Register 1.
37
www. .com
information@itm.com 1.800.561.8187