Hioki PW3335, Инструкция по эксплуатации

Страница: 102 / 123

100
PW3335A985-01
Set and Query :MEASure:HARMonic? Output Items (Order)
Syntax
Command
:MEASure:HARMonic:ITEM:ORDer
<Lower Limit Order (NR1)>,<Upper Limit Order (NR1)>,<ODD/EVEN/ALL>
Query
:MEASure:HARMonic:ITEM:ORDer?
Response
<Lower Limit Order (NR1)>, <Upper Limit Order (NR1)>,<ODD/EVEN/ALL>
Lower limit order (NR1): 0 to 50
Upper limit order (NR1): 0 to 50
(the lower limit must be less than or equal to the upper limit)
ODD: Odd orders only
EVEN: Even orders only
ALL: All orders
Description
Sets or queries the measurement items(Order) for
the
:MEASure:HARMonic? query.
The numerical value is accepted in NRf format, but any data after the
decimal point is truncated.
Example
Command
:MEAS:HARM:ITEM:ORD 1,15,ODD
Sets the output to an odd order between 1 and 15.
Query
:MEAS:HARM:ITEM:ORD?
Response
(When HEADER ON)
:MEASURE:HARMONIC:ORDER 1,15,ODD
(When HEADER OFF)
1,15,ODD
Note
・
This command is used along with the :MEASure:HARMonic:ITEM:LIST or
:MEASure:HARMonic:ITEM:xxx commands to specify the harmonic wave output items.
Set and Query :MEASure:HARMonic? Output Items
(Measurement status data:
instantaneous value, maximum value, minimum value)
Syntax
Instantaneous
value
:MEASure:HARMonic:ITEM:STATus:INST(?) <Output item>
Maximum/
Minimum value
:MEASure:HARMonic:ITEM:STATus:MAXmin(?) <Output item>
Response
<Output item (NR1)>
128 64 32 16 8 4 2 1
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
STATUS
Description
Sets the measurement data status (instantaneous value, maximum value,
minimum value) output items as numerical values between 0 and 1.
Although NRf numerical values are accepted, values to the right of the decimal
are dropped.
INST indicates the status for the instantaneous value at the time when the data
is acquired.
MAXmin indicates the total from the time the maximum and minimum values
were last reset.
For information about Status data, refer to :MEASure:ITEM:STATUS (page
77
)
for details.
Example
Command
:MEAS:HARM:ITEM:STAT:INST 1
Specifies to turn ON measurement status output.
Query
:MEAS:HARM:ITEM:STAT:INST?
Response
(When HEADER ON)
:MEASURE:HARMONIC:ITEM:STAT:INST 1
(When HEADER OFF) 1
www. .com
information@itm.com 1.800.561.8187