Hioki LR5092, Инструкция по эксплуатации

Страница: 32 / 148

3.3 Sending Measurement Condition Settings to Logger
26
Connect a logger to the collector, and then send the measurement conditions to the
logger.
Required Items: Logger to which you want to send the settings
3.3 Sending Measurement Condition Settings to
Logger
1
Show the top display of the collector.
(To return to the top display from another dis-
play, select
[Back] or [Cancel] .)
2
Move the cursor to [Logger Operation] ,
and then press the button.
3
Move the cursor to [Send/Receive] , and
then press the button.
(To return to the previous display, press the
F3
button.)
4
Place the logger and collector so that their
IR ports are aligned.
5
Move the cursor to [To Logger] , and then
press the button.
(To return to the previous display, press the F3
button.)
6
Press the button (or F2 button).
The settings are sent, and the previous display
reappears.
When you want to cancel the operation:
Press the
F1
button before the operation has
been performed to return to the previous dis-
play. Press the
F3 button to return to the top
display.
3
4
5
6
1
2