Hioki LR5092, Инструкция по эксплуатации

Страница: 129 / 148

8.2 Functions
123
3
8
Chapt
er
8 Spec
ifica
tions
Basic Specifications
* Logger with new serial number for which there is no collected data in both the collector and SD
memory card.
8.2 Functions
Data Collection
Collected data Recorded data
Collected data

save destinations
Collector memory and SD memory card
When either the collector memory or SD memory card already contains collected
data (from a logger with same serial number), the save destination is fixed to the
one with the saved data, and the save destination cannot be selected. (If both
contain data, the save destination becomes the SD memory card.)
One-touch collec-
tion function
• Place the logger and collector, and then press the Collect button to start data
collection.
• Collect uncollected data of logger.
• One-touch collection destination can be specified for a new logger
*
(collector
memory or SD memory card)
Data display Data is shown in a graph (waveform) after data collection.
Logger Settings
Measurement

condition settings
• Logger settings settable (The setting items differ depending on the logger.)
• Setting Items:

Recording interval, recording start method, recording stop method, recording
mode, scaling, alarm, power saving, clock, range, preheat, filter, comment
(only sending and receiving is possible, comment input and editing with the
collector is not possible)
Number of settings
storable
• Collector: 1 condition
• SD memory card: Limited by remaining space of card, maximum of 16 conditions
Settings acquisition Settings can be read from a logger
Logger Operations
Control a connected logger.
Control items Start recording, stop recording
Logger status

display
Display measurement conditions and measurement status (measurement in
progress, amount of memory used)
Data Operations
Display and clear collected data.
Display items
• Collected data list (collector memory): Displays models, serial numbers, and
comments
• Collected data list (SD memory card): Displays file names
• Maximum value, minimum value, and average value display
• Graph (waveform) display
• Numerical value display
Clear data Clear individual files or all data