Hioki IM9202, Инструкция по эксплуатации

Страница: 27 / 32

25
Maintenance and Service
Maintenance and Service
CAUTION
Do not attempt to modify, disassemble, or try to repair the device. Doing so may cause
a fire, electric shock, or injury.
Storage
If you do not intend to use the device for an extended period, store it in the carrying case.
Cleaning
• If the device becomes dirty, wipe the device clean with a soft cloth slightly moistened with water
or a neutral detergent.
• The measurement accuracy and reproducibility of the device’s electrode and short plate may
decrease due to dirt or deformation. If dirt sticks to the device, remove it by using the provided
cleaning brush.
• Remove the H-side lead component clip, the L-side lead component electrode, the L-side SMD
electrode, and the short plate. Gently brush the H-side electrode and base plate.
Moving parts service life
• The performance of some parts used in the device may degrade during the course or extended
use. When repair is necessary, please contact your authorized Hioki distributor or reseller.
• Service life varies with the operating environment and frequency of use. Please note that
performance is not guaranteed for the duration of the recommended replacement cycle.
Parts Recommended
replacement cycle
Conditions
Base plate 10000 times Number of times the L-side lead component
electrode and L-side SMD electrode have slid back
and forth
H-side lead component clip 10000 times Number of open/close cycles
L-side lead component
electrode
10000 times Number of times slid back and forth over base
plate
L-side lead component clip 10000 times Number of times slid back and forth over base
plate
Troubleshooting
If the device seems to be malfunctioning, contact your authorized Hioki distributor or reseller.
Transporting
Be sure to follow these precautions:
• To avoid damaging the device, store it in the carrying case with the H-side lead component clip
and the L-side lead component electrode connected to the base plate and with the electrode
locked in place with the knob. Remove the short plate and L-side SMD electrode.
• Keep the removed accessories in the original packing materials in which it was shipped, and
store in the carrying case. Additionally, be sure to double box the device. Accidental damage
suffered in transit is not covered by the warranty.
• Attach a description of the issue when sending out your device for repair.
Disposal
Dispose of the device in accordance with local regulations.
HIOKI IM9202A961-00