Hioki DSM-8104, Инструкция по эксплуатации

Страница: 90 / 132

80
Table 7.3 Setting Control Program Messages 6/10
Mnemonic Description Format
Ｖ Ｃ Ｍ Selection of auto voltage check execute mode
d1 (Select: 0 ~ 1)
0: OFF
1: ON [Format]
VCM d1
d1: NR1 format
Ｖ Ｃ Ｍ ？ Query response of auto voltage monitoring
execute mode is same as setting. [Format]
VCM?
[Response]
d1
Ｃ Ｃ Ｍ
Selection of auto contact check execute mode
d1 (Select: 0 ~ 1)
0: OFF
1: ON [Format]
CCM d1
d1: NR1 format
Ｃ Ｃ Ｍ ？
Query response of auto contact check execute
mode is same as setting. [Format]
CCM?
[Response]
d1
Ｗ Ｃ Ｐ
Work capacity setting
Capacity of work for open correction value
calculation
d1 (0.5 ~ 99.9) pF [Format]
WCP d1
d1: NR2 format
Ｗ Ｃ Ｐ ？
Query response of work capacity is same as
setting. [Format]
WCP?
[Response]
d1
Ｏ Ｓ Ｔ ？
Executes open correction once and capacity
value measured during open correction is
returned as a response.
In case of error, “999.9” is returned.
d1 (Jig capacity: 0 ~ 99.9)
In error: 999.9
[Note] Be sure to carry out open correction once
before performing a contact check. [Format]
OST?
[Response]
d1: NR2 format
Ｖ Ｃ Ｋ ？ Executes voltage check once and returns result
of it as a response.
d1 (0 ~ 1)
0: NO 1: GO [Format]
VCK?
[Response]
d1
Ｃ Ｃ Ｋ ？
Executes contact check once and returns result
of it as a response.
d1 (0 ~ 1)
0: NO 1: GO [Format]
CCK?
[Response]
d1