Hioki DSM-8104, Инструкция по эксплуатации

Страница: 49 / 132

39
Ｃ Ｏ Ｎ Ｆ Ｉ Ｇ Ｕ Ｒ Ａ Ｔ Ｉ Ｏ Ｎ Ｐ Ａ Ｇ Ｅ － ２ ／ ２
Ｇ Ｐ Ｉ Ｂ Ａ Ｄ Ｄ Ｒ ： ［ １ ］
２ ３ ２ Ｂ Ａ Ｕ Ｄ ： ４ ８ ０ ０ ／ ９ ６ ０ ０ ／ １ ９ ２ ０ ０
２ ３ ２ Ｄ Ａ Ｔ Ａ ： ７ Ｂ Ｉ Ｔ ／ ８ Ｂ Ｉ Ｔ
２ ３ ２ Ｐ Ａ Ｒ Ｉ ： Ｎ Ｏ Ｎ ／ Ｏ Ｄ Ｄ ／ Ｅ Ｖ Ｎ
２ ３ ２ Ｓ Ｔ Ｏ Ｐ ： １ Ｂ Ｉ Ｔ ／ ２ Ｂ Ｉ Ｔ
Ｐ Ａ Ｇ Ｅ
Fig. 5.11 External Interface Condition Setting Screen 2/2
The [F5] key changes to the PAGE (PAGE) function. Each pressing of the key
alternately changes pages.
Select an item to be set by operating the [
◄ ], [ ► ], [ ▲ ] and [ ▼ ] keys and set it.
The selected item will be highlighted in the display.
(2) Interlock function setting
Select “PAGE-1/2” and set an INTERLOCK: item.
The following function will set.
CONECT: The interlock function will be enabled.
In this case, output of measuring voltage will be enabled if “INTERLOCK” input
in the rear is short-circuited (low level input), prohibiting output of measuring
voltage if open-circuited (high level input).
When disabled, the [START] key will be disabled and a side mark (“
◄ ”) will light
up in the “INTERLOCK” display on the left of the LCD screen.
CUTOFF: Disables the interlock function.
In this case, measuring voltage can always be output irrespective of
“INTERLOCK” input in the rear.
(3) Beep tone setting
Set “BEEP: OFF/ON” and “BEEP: NO/GO” items on “PAGE-1/2.”
OFF: Beep tone is not sounded.
ON: Beep tone is sounded.
NO: Beep tone is sounded if decision is NG.
GO: Beep tone is sounded if decision is GOOD.
(4) Key click tone setting
Set “CLICK: OFF/ON” on “PAGE-1/2.”
OFF:Click tone is not sounded.
ON: Click tone is sounded.
(5) GP-IB address setting
Set “GP-IB ADDR” on “PAGE-2/2.” An address 0 to 30 can be set.
Input an address value operating the numeric input keys and press the [ENTER]
key to set.