Hioki DSM-8104, Инструкция по эксплуатации

Страница: 47 / 132

37
5.1.11 Setting operating environment
Press the [SETUP] (SET UP) key on the Measurement screen.
The screen changes to the Operating Environment Setting screen. (See Fig. 5.8)
９．９９９９Ｅ＋９９Ω
Ｍ Ｅ Ｓ ． Ｖ ： ０ ． １ Ｖ Ａ Ｖ Ｅ ： Ｏ Ｆ Ｆ
Ｓ Ａ Ｍ Ｐ Ｌ ： １ ０ ０ ｍ Ｓ Ｓ Ｅ Ｑ ： Ｏ Ｆ Ｆ ： ０
Ｄ Ｅ Ｌ Ａ Ｙ ： ０ ｍ Ｓ Ｒ Ａ Ｎ Ｇ Ｅ ： Ａ Ｕ Ｔ Ｏ １
Ｃ Ｏ Ｎ Ｆ Ｓ Ｅ Ｌ Ｆ Ｃ Ａ Ｌ Ｐ Ｏ Ｗ Ｒ
Fig. 5.8 Operating Environment Setting Screen
(1) Self-calibration setting
Press the [F3] CAL (CALIBRATION) key on the Operating Environment Setting
screen.
The screen changes to the Self-calibration Setting screen. (See Fig. 5.9)
Ｃ Ａ Ｌ Ｉ Ｂ Ｒ Ａ Ｔ Ｉ Ｏ Ｎ
Ａ Ｕ Ｔ Ｏ Ｍ Ｏ Ｄ Ｅ ： Ｏ Ｆ Ｆ ／ Ｏ Ｎ
Ｉ Ｎ Ｔ Ｅ Ｒ Ｖ Ａ Ｌ ： ［ ６ ０ ］ Ｓ ｅ ｃ
Ｄ Ｏ Ｗ Ｎ Ｕ Ｐ Ｅ Ｘ Ｅ Ｃ
Fig. 5.9 Self-calibration Setting Screen
The function keys will change to [F2] DOWN, [F3] UP and [F5] EXEC.
Select an item to be set by operating the [
▲ ] and [ ▼ ] keys.
After finishing settings, press the [ENTER] key to return to the Measurement
screen.
(2) “AUTO MODE” setting
This function executes self-calibration (self-calibration check of the A/D
converter and range) automatically at a preset time interval.
OFF: Auto self-calibration is not executed.
ON: Auto self-calibration is executed.
(3) “INTERVAL” setting
Set a time interval for auto self-calibration by inputting a time interval operating
the numeric input keys and pressing the [ENTER] key.
Or, a time interval can be selected from among designated values operating the
[F2] DOWN and [F3] UP keys because specified values are already set in the
meter.