Hioki 9605-01, Инструкция по эксплуатации, Страница: 62 / 100

56
────────────────────────────────────────────────────
8.3 Command Reference
────────────────────────────────────────────────────
Syntax
:HARMonic:PLL <character>
<character> = HU1, HU2, HU3, HI1,
HI2, HI3, CLK, EXT6, EXTC
EXT: external clock (see Section 3.3)
Example ":HARMonic:PLL HU1"
Sets the PLL source to HU1.
Function Selects the PLL source of the harmonic
analysis. This selects the PLL source for
harmonic analysis. Analysis is based on
the PLL source selected by this
command.
Note
Some channel numbers cannot be
specified as the first channel, depending
on the input unit configuration and
wiring mode of the 3194. In this case,
an execution error occurs.
Syntax
:HARMonic:PLL?
Response
syntax
":HARMONIC:PLL? <HU1, HU2, HU3,
HI1, HI2, HI3>
"
Example
Transmission
Response
":HARMonic:PLL?"
":HARMONIC:PLL HU1"
Function Queries the current selecting channel as
PLL source.
Syntax
:HARMonic:RTC
<NR1>
<NR1> = 0 to 10000
Example ":HARMonic:RTC 50"
Sets the harmonic RTC counter to 50.
Function The harmonic display update timing is
counted the specified number of times,
and is indicated in UE bit (bit 0) of
ESR0. When set to 0, this is off.
Note
If the setting value is other than 0 to
10000, an execution error occurs.
Syntax
:HARMonic:RTC?
Response
syntax
":HARMONIC:RTC
<0-10000>
"
Example
Transmission
Response
":HARMonic:RTC?"
":HARMONIC:RTC 50"
Function
Queries the counter value set by the
harmonic RTC counter.
:HARMonic:PLL
Sets the PLL source of the harmonic analysis.
:HARMonic:PLL?
Queries the PLL source of the harmonic analysis.
:HARMonic:RTC
Sets the harmonic RTC counter.
:HARMonic:RTC?
Queries the harmonic RTC counter.