Hioki 9605-01, Инструкция по эксплуатации, Страница: 37 / 100

31
────────────────────────────────────────────────────
4.6 Waveform Display
────────────────────────────────────────────────────
NOTE
Method 2
Press the
F5 "SELECT"
key.
Move the cursor to the display item box, and use
the
F1 "↑"
and
F2 "↓
" keys to make a
selection. After specifying, press the
F5
"RETURN
" key.
(4) Vertical axis scaling setting:
You can change the scaling ratio for the waveform
vertical axis.
Press the
F5 "SELECT
" key.
Move the cursor to the scaling factor box, and use
the
1 "↑"
and
F2 "↓"
keys to make a selection.
After specifying, press the
F5 "RETURN
" key.
･ Select the scaling factor from × 1/3, × 1, × 2,
and × 5. In this case, for example, using a
scaling factor of × 5, the waveform is
magnified by 5 times.
･
There is no offset function for moving the
position of the axis.
(5) Deleting the displayed channels
In 1P3W mode or above, more than one waveform
is shown within the same graph. In this case you
can switch off a waveform which is not required.
Press the
F5 "SELECT
" key.
Move the cursor to the waveform setting box, and
use the
F1 "↑"
and
F2 "↓"
keys to make a
selection. After specifying, press the
F5 "RETURN
"
key.