Hioki 9605-01, Инструкция по эксплуатации, Страница: 44 / 100

38
────────────────────────────────────────────────────
6.1 Selecting the Output Item to FDD/Printer
────────────────────────────────────────────────────
6.1.1 Output Setting in Harmonic Analysis Mode
NOTE
6.1 Selecting the Output Item to FDD/Printer
1. Press the
F2
"HARM SELECT"
key , to display the
screen for output item selection.
2. Move the cursor to
"OUTPUT ORDER"
key.
3. Select the
F1
"ALL"
,
F2
"ODD"
, or
F3
"EVEN"
key.
4. Move the cursor to
"MIN ORDER"
or
"MAX
ORDER"
key.
5. Use the
F1
"↑"
and
F2
"↓"
keys to make a
selection.
6. Using the
CURSOR
keys, move the cursor to the
item to be output.
7. Press the
F2
"ON"
key to make a setting. To
delete the item which has been set, press the
F1
"OFF"
key.
8. Pressing the
F3
"LINE"
key sets the items on
the specified line to on or off.
9. When the settings are completed, press the
F5
"RETURN"
key.
･ For example, when the output item is set to ODD, and "MIN ORDER" is set
to 1, and "MAX ORDER" is set to 10, this selects the data items for odd
harmonics in the range 1 to 10.
Even if the waveform output is set to ON, the data is not output on a
printer.
･ When sorting is enabled, the data is output in the displayed order.