Hioki 8715-01 Скачать руководство пользователя страница 37

Страница: 37 / 214

_____________________________________________________________________

2.7 Loading Recording Paper

______________________________________________________________

5. Pull the end of the recording

paper out at least 10 cm, and
make sure that it is positioned
quite straight.

6. Put down the head up/down

lever.

7. Pull the recording paper to the

outside through the printer exit
slot in the stock cover.

8. Close the stock cover, and

finish by tearing off the
recording paper against the
edge of the printer exit slot.

NOTE

･

When the stock cover is fully open, attempting to force it open

further may damage the cover.

･

The paper may jam if it is not aligned with the roller.

･

For shipping or long-term storage, be certain that the recording

head is in the raised position. Otherwise the rollers could be
deformed and cause uneven printing.

･

Be careful to correctly orient the recording paper. Nothing will

be printed if the recording paper is loaded with the wrong side
facing the print head.

･

We recommend using only the specified 9234 RECORDING

PAPER.

Содержание 8715-01























































































































































































































Результаты поиска

Содержание 8715-01

Отзывы:

Бренды по названию

Популярные бренды

Hioki 8715-01, Инструкция по эксплуатации

Результаты поиска

Содержание 8715-01

Отзывы:

Бренды по названию

Популярные бренды