Hioki 8715-01, Инструкция по эксплуатации

Страница: 16 / 214

viii
_____________________________________________________________________
Notes on Use
______________________________________________________________
DANGER
To avoid electric shock and damage to the instrument, do not
apply more than 450 V AC or DC between the analog inputs
and instrument, or between the analog inputs.
Use only the supplied AC adapter [9418-10 (PSA-30U-120,
PHIHONG), or 9418-15 (SA130A-1225V-S, SINO AMERICAN)].
AC adapter input voltage range is 100 to 240 VAC (with 10%
stability) at 50/60 Hz. To avoid electrical hazards and damage
to the instrument, do not apply voltage outside of this range.
To avoid damaging the instrument, do not apply voltage
exceeding the selected range to the input terminals, and never
exceed the maximum ratings for the analog input connection
cable or probe shown in the following table. In addition to
these limits, note that the absolute maximum analog input
voltage is 450V AC/DC.
Input/output terminal Maximum input voltage
Analog input 450 V AC, DC
EXT TRIG -5 V to +10 V
TRIG OUT -20 V to +30 V
500 mA max, 200 mW max
Maximum input voltage
9197 CONNECTION CORD 500 V AC, DC
9217 CONNECTION CORD 300 V AC, DC
9448 CONSENT INPUT
CORD
125 V
9322 DIFFERENTIAL PROBE 1000 V AC, 2000 V DC (CAT ll)
600 V AC, DC (CAT lll)
WARNING
For battery operation, use only the Hioki Model 9447
BATTERY PACK. We cannot accept responsibility for
accidents or damage related to the use of any other
batteries.
NOTE
The 8715-01 POWER HiCORDERs are not affected by a drop in
power lasting 40 ms or less. However, a drop in power lasting
more than 40 ms may interrupt the power supply. Check the
power supply conditions at the installation site in advance.
Notes on Use
Follow these precautions to ensure safe operation and to
obtain the full benefits of the various functions.