Hioki 2331-20 Скачать руководство пользователя страница 7

Страница: 7 / 60

Safety Notes

The following symbols in this manual indicate the
relative importance of cautions and warnings.

Other Symbols

Accuracy

We define measurement tolerances in terms of f.s.
(full scale), and rdg. (reading) values, with the fol-
lowing meanings:

Indicates that incorrect operation presents an

extreme hazard that could result in serious injury

or death to the user.

Indicates that incorrect operation presents a

significant hazard that could result in serious

injury or death to the user.

Indicates that incorrect operation presents a

possibility of injury to the user or damage to the

instrument.

Indicates advisory items related to performance

or correct operation of the instrument.

Indicates the prohibited action.

❖

Indicates the reference.

f.s.

(maximum display value or scale length)

The maximum displayable value or scale length.

This is usually the name of the currently selected

range.

rdg.

(reading or displayed value)

The value currently being measured and

indicated on the measuring instrument.

Содержание 2331-20





























































Результаты поиска

Содержание 2331-20

Отзывы:

Похожие инструкции для 2331-20

Бренды по названию

Популярные бренды

Hioki 2331-20, Инструкция по эксплуатации

Результаты поиска

Содержание 2331-20

Отзывы:

Похожие инструкции для 2331-20

Бренды по названию

Популярные бренды