Hino 600, Руководство по ремонту, Страница: 437 / 451

PARKING BRAKE (BOSCH 12") BR07–9
(9) If the lever has been removed, reinstall lever and associated compo-
nents per the ANCHOR SCREW, LEVER, AND CAM REPLACE-
MENT section in the manual.
(10) Route the adjuster cable around the adjuster cable guide, under the
shoe hold down spring, and attach to the adjuster lever as shown in
Figure 6. Install adjuster cable retaining tab if so equipped.
NOTICE
Correctly assembled, the adjuster cable end-fitting is behind the
adjuster lever, with the spring hook facing out as shown in Figure 6.
(11) The shoe cage should be adjusted now per the SHOE CAGE
ADJUSTMENT PRIMARY procedure or after the drum has been rein-
stalled per the SHOE CAGE ADJUSTMENT ALTERNATE procedure
in this service manual.
(12) Make a final inspection of the shoe linings and the inside of the drum
to ensure that no grease or other contamination was accidentally
applied.
! WARNING
Keep grease and other foreign materials away from the shoe lining
and drum surfaces. Contamination of shoe linings or drum surface
may result in degradation of brake holding capability, possibly result-
ing in personal injury or property damage.
(13) Inspect, service and reinstall drum per the vehicle manufacturer's ser-
vice manual.
SHTS06Z080700008