Hinds Instruments EXICOR 150AT Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 95

Hinds Instruments EXICOR 150AT Скачать руководство пользователя страница 69

Managing Files

Exicor 150AT User Manual

59

Managing Files

Note:

File operations performed in the Exicor software must have a total path
length less than 256 characters.

When to Re-save Files

Although the Exicor software automatically saves files during automatic scans, the
files should again be saved in the following situations:

•

Notes have been added to the file.

•

The sample thickness value has been changed. The sample thickness should

be correctly defined by the operator at the beginning of the scan.  If the sample
thickness setting was incorrect, it can be changed and the file re-saved.  When
it is changed, the birefringence values will be recalculated and the plot redrawn.
Do not change the sample thickness unless the original thickness was incorrect.

•

The legend settings have been changed and it is desired to save the changes

for future reference

When all desired changes have been completed, save the file via

File

Save

to

save the new information.

File Formats

Exicor software can save in 2 different formats.  Both formats are readable by text
readers and are easily imported into spreadsheet applications.  Only the .DAT
format is readable by Exicor.

.DAT

By default, Exicor saves data in the .DAT format. This format is readable by Exicor
and text readers such as Windows Notepad. The file contains

•

header data: the scan and instrument settings

•

measurement data: the data points are listed in the order they were collected

during the scan. The data is arranged in columns with a heading for each
column. The most commonly viewed columns are

•

X

: The x coordinate of the point

•

Y

: The y coordinate of the point

•

Mag

: The retardation magnitude of the point

•

Biref

: The birefringence magnitude of the point

•

Stress

: The stress magnitude of the point

•

Time

: The time the data point was taken

«
...
67
68
69
70
71
...
»

Содержание EXICOR 150AT
































































































Отзывы:

Нет отзывов