HIMS Braille Sense U2 QWERTY, Руководство пользователя

Страница: 411 / 493

411
in the "Global Options" dialog. You can toggle the Ethernet port on and off
from anywhere on Braille Sense U2 QWERTY using "Fn-F11". From the list
of connection options in "Set up Internet", navigate to "LAN" and press
"Enter".
"Setup IP: Automatic" is displayed. If your service provider does not require
you to use a static IP address, simply press "Enter" on this option for
automatic setup. For the automatic setup, your host server should provide
DHCP service (Dynamic Host Configuration Protocol).
To set up your IP configuration manually, move to "Manual" by pressing “up
arrow button”, and press "Enter". The following settings are displayed: "IP",
"Subnet mask", "Gateway", and "Primary DNS". These settings require
specific numeric addresses. Please contact your Internet service provider for
the correct addresses. Use computer Braille to type the information for each
setting, using “up arrow button” and “down arrow button” to move among the
settings. When you have entered the information for each item, press "Enter"
to save the settings. The unit announces, "Setting completed". And you are
returned to "Setup internet". Your Internet connection should be active, thus
allowing you to use E-mail, the Social Networking programs, or the Web
browser.
17.10.2 Setup Wireless LAN
Before setting up a Wireless LAN connection, be sure wireless is turned on
in the "Global Options" dialog. You can toggle wireless on and off from
anywhere on the Braille Sense U2 QWERTY using "F11". To connect to a
wireless network, navigate to the "Wireless LAN" option in the connection
types list under "Setup Internet" and press "Enter".
The "Wireless LAN" dialog consists of the "access points" list, "Advanced"
button and "Close" button. You can move among these controls by pressing
“Tab” or "shift-tab". If wireless is not turned on, the "access points" list
displays "no items".