HIMS Braille Sense U2 QWERTY, Руководство пользователя

Страница: 214 / 493

214
5) Press "Enter" on "E-mail address string: (e-mail address)". Or, press "Tab"
to move to the "Confirm" button, and press "Enter".
6) "Successfully added spam data" is announced and "E-mail address string:
(Registered e-mail address) 1/1" is displayed.
When "E-mail address string: (registered e-mail address) 1/1" is displayed,
you can add another address by pressing "a" or pressing "Tab" to move to
the "Add" button, and press "Enter". You can check the registered e-mail
addresses by pressing “up arrow button” or “down arrow button”.
To register a specific host as a spam sender, do the following:
1) Use the steps described above to open the "Spam Settings" dialog.
2) Press “down arrow button” when "Type: Subject 1/3" is displayed to move
to "Type: Host 3/3".
3) Press "a" on "Type: Host 3/3", or press "Tab" to move to the "Add" button,
and press "Enter".
4) The "Add dialog" is opened, and "Host add: (host address)" is displayed.
By default, "host address" is the host address that was focused on when you
executed this command. You can add this host or type a different host in the
edit box.
5) Press "Enter" on "Host add: (host address)". Or, press “Tab” to move to
the "Confirm" button, and press "enter".
6) The Braille Sense U2 QWERTY says, "Successfully added spam data"
and shows "Host: (registered host address) 1/1".
When "Host: (registered host address) 1/1" is displayed, you can add
another host by pressing "a" or pressing "Tab" to move to the "Add" button,
and press "Enter". You can check the registered host addresses by pressing
“up arrow button” or “down arrow button”.
To cancel setting spam filters from the "Add dialog", press "Tab" to move to
the "Cancel" button, and press "Enter". Or, press "Esc" or "Alt-F4".