HIMS Braille Sense U2 QWERTY, Руководство пользователя

Страница: 41 / 493

41
On the far right of the rear panel, is a rectangular cavity used for containing
the detachable battery. The battery is packaged separately from the unit
when the Braille Sense U2 QWERTY is shipped. Insert the battery into this
rectangular slot until you feel it click into place. To remove the battery,
locate the triangular-shaped latch on the underside of the unit. Using your
left hand, pull the latch to the right, and use your right hand to pull the
battery out of the compartment.
1.2.5 The Front Panel
On the far left of the front panel is an emblem displaying the location of the
GPS antenna. To the right of the "GPS" emblem, is the stereo microphone
jack, used for connecting an external microphone or line level recording
source. To the right of the microphone jack is the stereo headphone jack.
To the right of the headphone jack is another 3-position slide switch. This is
the "Media Mode" switch, and determines which type of media the media
buttons control. This switch is explained in more detail in the next section.
To the right of the "Media Mode" switch, are five buttons of varying shapes.
These buttons control media playback. As explained above, the type of
content controlled by these buttons depends on the position of the "Media
Mode" switch. These buttons can control media playback, DAISY playback,
or the FM radio. These five buttons are explained further in the FM Radio,
Daisy and Media chapters of this manual.
To the right of the media buttons is the on/off switch. To turn on the unit,
push the switch to the right. To turn off the unit, repeat this action.
Congratulations! You are now familiar with the basic functions of the
buttons and ports of the Braille Sense U2 QWERTY. The rest of the
manual discusses each function in greater detail to help you maximize the
potential of your Braille Sense U2 QWERTY.
1.3 Hardware Specifications(modify)