Device drawings and connectors
31/75
5.2
Positions of the LEDs, connectors and control elements
5.2.1
netHOST for Fieldbus systems
The following figure depicts LEDs, connectors and control elements of the
netHOST for Fieldbus systems. The left part of each netHOST is identical
for all device types, the right part differs according to fieldbus type.
NHST-T100-DP
(1)
Connector for supply voltage (X1)
(2)
Slot for SD memory card
(part number 1719.003)
(3)
Address switch (factor 10), can be monitored in
the system information block.
(4)
Address switch (factor 1), can be monitored in
the system information block.
(5)
SYS LED (system status)
(6)
APL LED (application status)
(7)
Mini USB service interface
(protected by a cover)
(8)
LINK LED for LAN channel 0
(9)
LAN interface channel 0
(X2, RJ45 socket)
(10)
ACT LED for LAN channel 0 (activity)
(11)
LINK LED for LAN channel 1
(12)
LAN interface channel 1
(X2, RJ45 socket)
(13)
ACT LED for LAN channel 1 (activity)
(14)
LED communication status of fieldbus
PROFIBUS DP Master (NHST-T100-DP):
COM
CANopen Master (NHST-T100-CO):
CAN
DeviceNet Master (NHST-T100-DN):
MNS
(15)
Fieldbus interface
(X3)
PROFIBUS DP Master (NHST-T100-DP):
Dsub 9‑pole female
CANopen Master (NHST-T100-CO):
Dsub 9‑pole male
DeviceNet Master (NHST-T100-DN):
COMBICON 5‑pole
Table 19: LEDs, connectors and operating elements of netHOST for Fieldbus systems
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018
