hilscher netHOST NHST-T100, Руководство пользователя

Страница: 21 / 75

Safety 21/75
2.5 Safety instructions to avoid personal injury
To ensure your own personal safety and to avoid personal injury, you must
read, understand and follow the safety instructions and all safety messages
in this manual about danger that might cause personal injury, before you
install and operate your netHOST device.
2.5.1 Danger of unsafe system operation
To prevent personal injury, make sure that the removal of the device from
your plant during operation will not affect the safe operation of the plant.
2.6 Safety instructions to avoid property damage
To avoid property damage to your system or to the netHOST device, you
must read, understand and follow the safety instructions and all safety
messages in this manual about danger that might cause property damage,
before you install and operate your netHOST device.
2.6.1 Device destruction by exceeding allowed supply voltage
Observe the following notes concerning the supply voltage:
· The netHOST may only be operated with the specified supply voltage.
Make sure that the limits of the allowed range for the supply voltage are
not exceeded.
·
A supply voltage above the upper limit can cause severe damage to the
netHOST!
·
A supply voltage below the lower limit can cause malfunction of the
netHOST.
The allowed range for the supply voltage is specified in the section
Technical data of the netHOST devices [
}
page 62].
2.6.2 Danger of unsafe system operation
To prevent property damage, make sure that the removal of the device
from your plant during operation will not affect safe operation of the plant.
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public © Hilscher 2013 – 2018