hilscher netHOST NHST-T100, Руководство пользователя

Страница: 26 / 75

Description 26/75
3.3 Interfaces
All interfaces are easily accessible at the front of the netHOST device. In
addition to the necessary network interfaces, every device is also equipped
with a USB interface (protected by a cover) and an SD memory card slot.
The USB and SD memory card interfaces can be used to perform a
firmware recovery or to reset the device to its “factory settings” (see chapter
Firmware-Recovery [
}
page 45]).
netHOST for Fieldbus systems
The netHOST devices NHST-T100-DP/DPM , NHST-T100-CO/COM and
NHST-T100-DN/DNM are equipped with two RJ45 sockets on the left side
( X2 ), in order to connect the device to the LAN network by which the
netHOST is controlled/marshalled. The interface for the Fieldbus (i. e. the
secondary network), which is to be controlled by the netHOST, is located
on the right side of the device (
X3 ) and consists of a PROFIBUS DP,
CANopen or DeviceNet interface and the appropriate fieldbus connector
hardware (according to the device type).
The following figure shows the NHST-T100-DP/DPM netHOST device:
Figure 2: netHOST for Fieldbus: NHST-T100-DP/DPM (example)
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public © Hilscher 2013 – 2018