LEDs
59/75
LED state
Definition
Blinking
(2.5 Hz)
The indicator turns on and off with a frequency of 2.5 Hz: “on” for 200 ms,
followed by “off” for 200 ms.
Single
Flickering
The indicator is switched on and off once:
"on" for 50 ms, followed by "off" for 500 ms.
Double
Flickering
The indicator is switched on and off and on once:
"on" / "off" / "on" each for approximately 50 ms, followed by "off" for 500 ms.
Flickering
(10 Hz)
The indicator turns on and off with a frequency of 10 Hz: “on” for 50 ms,
followed by “off” for 50 ms.
Flickering
(load
dependent)
The indicator turns on and off with a frequency of approximately 10 Hz to
indicate high Ethernet activity: on for approximately 50 ms, followed by off
for 50 ms. The indicator turns on and off in irregular intervals to indicate low
Ethernet activity.
Table 45: LED state definitions for the EtherCAT Master(V4) protocol
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018
